Action 1: before the workblank stone slab is conveyed to the curing furnace after pressed and formed, the plate pulling device passes through the middle of the curing furnace, the clamping mechanism works to clamp the rubber die block, and then the pulling plate device retracts the pulling plate platform,the slate is sent to the curing furnace, and when passing the curing oven, the detection switch detects the bottom die block, the clamping mechanism of the pulling device will release and the plate pulling device is retracted.
Action 2: After the workblank stone slab is solidified in the curing oven, the plate pulling device extends to the curing furnace mouth again and clamps the rubber die block, the plate pulling device is retracted from the plate pulling platform while the tight rubber die block and the slab withdraw. When detected by the detection switch, the clamp of plate pulling device will release and complete the transportation of rubber die block and stone slab. The lifting device falls, the rubber die block and stone plate fall onto the conveyor chain, the conveying motor drives the conveying chain to rotate, take out the rubber die block and stone plate from the plate pulling machine and transport is finished.
Power of platform reducer (kW)
3
Power of reducer for plate pulling machine (kW)
3
Power of conveying reducer (kW)
3
Total power (kW)
9
Size and length of conveyor chain
12A, 10,250mm long each
16A, 13,890mm long each
External dimensions (mm)
6826x2312x1511
