The product is sent to the trimming length cutter through the automatic roller table of the polishing line. After electrical eye of trimming length cutter detects that slab enters the machine, the baffle device rises and the slab continues to move forward. When it reaches the baffle device, it is blocked and stopped.
At this time, The slab is risen up by jacking assembly, and then triggered the centering action by centering assembly. Because both sides of slab width have been cut neatly, one side of the centering is positioned with the depended wheel and the other side is pushed by the air cylinder, so as to make the perpendicularity between the transverse cutting edge and length more accurate.
After the centering of slab is completed, the cutting head starts to move laterally, and the cutting tool rotating at high speed on the cutting head cuts the length of slab at both ends, so as to achieve the purpose of determining the length of slab by transverse cutting.
Thickness of slab（mm）
15-40
Length of slab（mm）
3000-3280
Power of transmission power（kW）
1.5kw
Power of transverse moving motor(kw)
2x0.75kw
Power of cutting head (kW)
2x11kw
Power of width adjusting motor（kW）
2x0.1kw
Power of lifting motor(kw)
2x0.37kw
Total power（kw）
25.94kw
Air pressure（MPa）
0.6-0.8
Overall dimension（mm）
4740x2750x1795
Total weight（kg）
3600
